Rockwool Insulation

ROCKWOOL LRB MATTRESSES

Rockwool LRB Mattress is a high-performance thermal and acoustic insulation material made from mineral wool fibers, lightly bonded with a thermosetting resin. It offers excellent fire resistance, thermal efficiency, and sound absorption.

Specifications :
Density: 80 to100 kg/m3
Thickness: 30 To 100 mm
Material: Rockwool

Key Features

High Thermal Insulation: Reduces heat loss in industrial and commercial applications.
Fire Resistance: Non-combustible with a high melting point (>1000°C).
Acoustic Insulation: Effectively absorbs sound and reduces noise levels.
Moisture & Chemical Resistant: Does not absorb water and resists chemical attacks.
Durable & Flexible: Easy to install and retains shape over time.

ROCKINSUL BUILDING ROLLS

Stone wool fibers in ROCKINSUL Building Rolls are fine and uniformly distributed that ensures excellent & uniform thermal resistance.

Specifications :
Thickness: 50mm-100mm
Width : 1.1 – 1.2 m
Length : 5 to 10 m
Temp Range: up to +750 Deg. Cel
Density: 40-80 kg/m3

Range

Density : 40 to 100 kg/m3
Thickness : 50 to 100 mm
Width : 1.1 to 1.2 m
Length : 5 to 10 m
Available with or without facing

Key Features

Stone wool fibers in ROCKINSUL Building Rolls are fine and uniformly distributed that ensures excellent & uniform thermal resistance.
The stable stone wool fibers bonded with thermosetting resins are light in weight, strong and resilient..

ROCKINSUL RB SLABS

ROCKINSUL RB slabs are semi-rigid and rigid boards manufactured from stable rock fibers bonded with a minimum quantity of thermosetting resin binder. ROCKINSUL RB slabs are capable of withstanding extreme temperature up to 750 °C and are light weight, strong, resilient, easy to handle, and easy to cut to suit intricate shapes.

Specifications :
Thickness: 25mm-150mm
Width : 0.6m
Length : 0.6 to 1.2 m
Temp Range: up to +750 Deg. Cel
Density: 40-180 kg/m3

Range

Density : 40 to 180 kg/m3
Thickness : 25 to 150 mm
Width : 0.6m
Length : 0.6 to 1.2 m

Key Features

ROCKINSUL RB Slabs achieve excellent acoustic performances (sound absorption coefficients, sound insulation, and impact sound isolation) when tested in accordance to various relevant ASTM standards.
RB Slabs achieve Noise Reduction Coefficient (NRC) values up to 1, when tested in accordance to ASTM C423.

ROCKINSUL LOOSE WOOL

ROCKINSUL Loose wool insulation is specially graded and designed to in-fill around pipe bundles and to completely fill irregular voids. They can be installed either by hand packing or by using specially designed blowing equipments.ROCKINSUL Loose wool are also used in non-asbestos organic formulations for friction products, such as railway brakes, commercial vehicle and passenger car linings and disc pads , clutch facings etc. It has excellent performance characteristics, and offers distinctive advantages over traditional filler / reinforcing materials.

Range

Unbonded Loose Stone Wool Fibres
NoSpecific Density or Thickness
Infill Material for Complex Shapes

Key Features

Excellent thermal, acoustic and fire properties.
Resistance to high temperatures.
Reliable performance; thermal conductivity cannot degrade due to loss of entrapped gas.
Free from HFC’s and other blowing gases.
Non combustible.

ROCKINSUL PIPE SECTIONS

ROCKINSUL Pipe Sections are made from non-combustible, inorganic rock fibers and are suitable for the insulation of small and large diameter heating and ventilation pipes.

Specifications :
Thickness: 25mm-100mm
Diameter : 15 – 600 mm(NB)
Length : 1.2 to 1.25 m
Temp Range: up to +750 Deg. Cel
Density: 100-160 kg/m3

Range

Density :100 to 160 kg/m3
Thickness : 25 to 100 mm
Diameter : 15 to 600 mm (NB)
Length : 1.2 to 1.25 m

Key Features

It is suitable for any small/large curved surfaces or cutting to fit over irregular shaped surfaces, such as valves.